Dell S2815dn tm Smart Multifunction Printer User Guide - Page 164
LDAP User Mapping, IP Filter IPv4 - factory reset
View all Dell S2815dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Reset Print Server Purpose: To initialize NVRAM (non-volatile RAM) for the network feature and reboot the printer. You can also initialize NVRAM of the printer from Reset Defaults in the Printer Settings menu. Values: Initialize NIC NVRAM Memory and restart printer. Restart Printer Click Start to initialize NVRAM, revert network settings to the factory default settings, and reboot the network capability. Click Start to reboot the printer. Security The Security tab includes Set Password, Authentication System, Kerberos Server, LDAP Server, LDAP Authentication, LDAP User Mapping, SSL/TLS, IPsec, 802.1x, IP Filter (IPv4), and SMTP Domain Filtering. Set Password Purpose: To set or change the password that is required to access the setup parameters of the printer from the Dell Printer Configuration Web Tool. This page can also be displayed by clicking Set Password in the left frame. NOTE: To restore the password to the default (NULL), initialize the non-volatile memory (NVM). NOTE: You can set the password for access to Admin Settings from Panel Lock in Printer Settings. Values: Administrator Password Re-enter Administrator Password Access denial by the authentication failure of the Administrator Sets the password using up to 128 alphanumeric characters. Confirms the set password. Sets how many times the failure in administrator authentication is allowed in total. Sets the number from 5 to 255. If you set 0, this mode is disabled. Authentication System Purpose: To specify the server authentication type, the server response time-out, or the search time-out. Values: Authentication Type Optional Information Authentication System Settings Server Response TimeOut Search Time-Out Select the authentication system from the list. Sets the amount of time the printer should wait for response from the server. Sets the time period from 1 to 75 seconds. Sets the amount of time the printer should wait for searching for the server. Sets the time period from 5 to 120 seconds. 164 Dell™ Printer Configuration Web Tool