Dell S2815dn tm Smart Multifunction Printer User Guide - Page 314

Margin To specify the margins of the copy: 1 Swipe the screen until Margin appears, and then tap Margin. 2 Tap - or + to enter the desired value, and then tap OK. Top / Bottom 0.2 inch* (4 mm*) Specify the value in increments of 0.1 inch (1 mm). Available Range: 0.0-2.0 inches (0-50 mm) Left / Right 0.2 inch* (4 mm*) Specify the value in increments of 0.1 inch (1 mm). Available Range: 0.0-2.0 inches (0-50 mm) Middle 0 inches* (0 mm*) Specify the value in increments of 0.1 inch (1 mm). Available Range: 0.0-2.0 inches (0-50 mm) * Denotes the factory default settings. Auto Exposure To suppress the background of the original to enhance text on the copy: 1 Swipe the screen until Auto Exposure appears, and then tap Auto Exposure. 2 Tap On. Using the ID Copy NOTE: If the Functions Control setting for ID Copy is set to Disable, the ID copy function is disabled and the menu is also disabled on the screen. For details, see "Functions Control." You can copy both sides of an ID card on one side of a single sheet of paper in its original size by tapping ID Copy on the touch panel. To make a copy: 1 Place an ID card facing down on the document glass, and close the document cover. For details about loading a document, see "Making Copies From the Document Glass." 2 Press the (Home) button. 3 Tap  ID Copy. 4 Specify the copy settings below as required. • Quantity • Darken / Lighten • Select Tray • Sharpness • Auto Exposure For details, see "Setting Copy Options." 5 Tap Copy to begin copying. After the front side of the ID card is scanned, the display prompts you to turn over the card. a To scan the back side of the ID card, turn the ID card over and tap Continue. b To finish copying, tap Print Now. 314 Copying