Dell S2815dn tm Smart Multifunction Printer User Guide - Page 266
Labels, Storing Print Media, CAUTION, WARNING
View all Dell S2815dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 266 highlights
Labels Your printer can print on many labels designed only for use with laser printers. When selecting labels: • Label adhesives, face sheet (printable stock), and topcoats must be able to withstand temperatures of 205 °C (401 °F) and pressure of 25 pounds per square inch (psi). • Use labels that can be without sealing, excessive curling, wrinkling, or releasing hazardous emissions. • Do not use label sheets with a slick backing material. CAUTION: Before buying large quantities of any print media, it is recommended that you try a sample first. When printing on labels: • Use labels that can withstand temperatures of 205 °C (401 °F) without sealing, excessive curling, wrinkling, or releasing hazardous emissions. • Set the paper type to Label in the printer driver. • Load labels in the MPF. Tray1 and the optional 550-sheet feeder do not support labels. • Do not load labels together with paper in the MPF. • Do not print within 1 mm (0.04 inches) of the die-cut. • Do not print within 1 mm (0.04 inches) of the edge of the label, of the perforations, or between die-cuts of the label. • Do not print a label through the printer more than once. • Portrait orientation is preferred, especially when printing bar codes. • Do not use labels that have exposed adhesive. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. • Do not use label sheets that have adhesive to the edge of the sheet. It is recommended that zone coating of the adhesive is done at least 1 mm (0.04 inches) away from edges. Adhesive material contaminates your printer and could void your warranty. WARNING: Otherwise a jam occurs in the printer and contaminate your printer and your cartridge with adhesive. As a result, could void your printer and cartridge warranties. Storing Print Media For proper print media storage, the following guidelines will help to avoid media feeding problems and uneven print quality. • Store print media in an environment where the temperature is approximately 21 °C (70 °F) and the relative humidity is 40 %. • Store cartons of print media on a pallet or shelf, rather than directly on the floor. • If you store individual packages of print media out of the original carton, ensure that they rest on a flat surface so that the edges do not buckle or curl. • Do not place anything on top of the print media packages. 266 Print Media Guidelines