Dell S2815dn tm Smart Multifunction Printer User Guide - Page 353

You can select MH, MR, or MMR. You can change the modem receive encoding with the following instructions. 1 Turn on the printer while holding down the 8 and 2 buttons on the number pad to start in Customer Mode. 2 Tap button to tap Fax/Scanner Diag, and then tap OK. 3 Tap button until Parameter appears, and then tap OK. 4 Ensure that FAX Parameter appears, and then tap OK. 5 Tap button until G3M RX Coding appears, and then tap OK. 6 Tap button until the desired encoding appears, and then tap OK. You can select MH, MR, or MMR. Diagnosing the Fax Connection You can diagnose the Fax connection using the FAX Line Diagnosis feature that can detect the abnormalities of telephone line connection. 1 Turn on the printer while holding down the 8 and 2 buttons on the number pad to start in Customer Mode. 2 Tap button to tap Fax/Scanner Diag, and then tap OK. 3 Tap button until FAX Test appears, and then tap OK. 4 When the message Check FAX Connection appears, tap OK. 5 When the message Ready to Start appears, tap OK to start diagnosing the FAX connection. One of the following diagnosing result is displayed. Diagnosing result Description Connection not Detected Please Reconnect Telephone Line The telephone line cord is not connected. Make sure that the telephone line cord is securely connected. Cable Connected Wrongly Reconnect Telephone Line from Wall Jack to Line Connection The telephone line cord is connected to the wrong connector. Make sure that the telephone line cord is connected at one end to the wall jack connector ( ) of your printer and at the other end to an active wall jack. If you use a telephone or answering machine, connect to the phone connector ( ). Fax Connection OK The telephone line cord is properly connected. Check the Tone/Pulse Please Check Setting of Tone/Pulse in Admin Menu after Restart Printer setting. For information Settings Options." on Tone/Pulse setting, see "Available Fax Faxing 353