Dell S2815dn tm Smart Multifunction Printer User Guide - Page 337
Scanning to a USB Memory, Types of a USB Memory, Procedures
![]() |
View all Dell S2815dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 337 highlights
Scanning to a USB Memory The Scan to USB feature allows you to store scanned image directly to a USB memory attached to the printer without using software. Types of a USB Memory You can use a USB memory with the following interfaces: • USB 1.1 • USB 2.0 The USB memory must be formatted in FAT file systems (FAT16, FAT32, or VFAT) before inserting the memory device into the front USB port of the printer. NOTE: If the USB memory is formatted in a file system other than above, the printer may not recognize that the USB memory is attached. NOTE: A USB memory with authentication feature and some brands of USB memories cannot be used with this printer. Procedures To store the scanned images to a USB memory: NOTE: If you insert a USB memory to the front USB port first, the USB Drive Detected screen may appear. In this case, select Scan to USB, and proceed to step 6. 1 Load the document(s) facing up with top edge in first into the DADF. OR Place a single document facing down on the document glass, and close the document cover. For details about loading a document, see "Loading an Original Document." 2 Press the (Home) button. 3 Insert a USB memory into the front USB port of the printer. See "Inserting and Removing a USB Memory" for more details. 4 Tap Scan to USB. 5 Tap and specify scan settings such as Output Color, Resolution, File Format, 2 Sided Scanning, Darken/Lighten, Contrast, Sharpness, Auto Exposure, Original Size, Margin, and File Naming Mode. For details, see "Scan Settings." You can also specify the folder to save the scanned image. For details, see "Specifying a Folder to Save the Scanned Image." 6 Tap Scan to begin scanning the document. 7 Remove the USB memory from the printer. See "Inserting and Removing a USB Memory" for more details. Specifying a Folder to Save the Scanned Image To save the scanned image to a folder in the USB memory, specify the folder before executing the scan job. 1 If a folder has already existed in the USB memory, the folder name appears on the display. 2 Select a folder to save the scanned image. NOTE: The default saving location is the root directory of the USB memory. NOTE: You cannot directly enter a folder path using the numeric keypad. NOTE: You can select any folder in the USB memory but cannot create a new folder in this step. You should always create a new folder before connecting the memory to the printer. Scanning 337
![](/manual_guide/products/dell-s2815dn-tm-smart-multifunction-printer-user-guide-e6e3b3c/337.png)