Dell S2815dn tm Smart Multifunction Printer User Guide - Page 309

Select Tray To select the tray: 1 Tap Select Tray. 2 Tap the desired setting, and then tap OK. MPF Tray1* Tray2 The paper is fed from the multipurpose feeder. The paper is fed from tray1. The paper is fed from the optional 550-sheet feeder. * Denotes the factory default setting. NOTE: Tray2 is only available when the optional 550-sheet feeder is installed. NOTE: When Any is displayed as the paper size and type in the MPF, you can select the paper size and type from this menu. For details, see "Select Tray." 2 Sided Copying To make duplex copies with the specified binding position: 1 Swipe the screen until 2 Sided Copying appears, and then tap 2 Sided Copying. 2 Tap the desired setting, and then tap OK. 1  1 Sided* 1  2 Sided Select 1 sided or 2 sided and specify binding position for the 2 sided copy. 2  1 Sided 2  2 Sided Long Edge Binding Short Edge Binding * Denotes the factory default setting. When you are using the document glass and it is set to 1  2 Sided or 2  2 Sided, the display prompts you for another page after tapping Copy. a If you want to place a new document, replace the document with a new document, and then tap Continue. b If you finish copying, tap Print Now. NOTE: When you use the DADF to copy both sides of a document, the printed position of the front and back of the document may differ if the size in the document size setting and the size of the document do not match. In this case, set Original Size to the same size as the document. Copying 309