Dell S2815dn tm Smart Multifunction Printer User Guide - Page 169
Purpose, Values, IP Filter Setup Procedure, Enabling Printing From a Specified User, Access List,
View all Dell S2815dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
802.1x Purpose: To specify the settings for IEEE 802.1x authentication for encrypted communication to the printer. Values: Configure 802.1x Enable IEEE 802.1x Select the check box to enable IEEE 802.1x authentication. Authentication Method EAP-MD5 EAP-MSCHAPv2 Selects the authentication method to use for IEEE 802.1x authentication. PEAP/MSCHAPv2 Login Name: (Device Name) Password Re-enter Password Sets the login name (device name) for IEEE 802.1x authentication using up to 128 alphanumeric characters. Sets the login password for IEEE 802.1x authentication using up to 128 alphanumeric characters. Confirms the set login password. IP Filter (IPv4) Purpose: To specify the IP address and subnet mask to be permitted or denied access to the printer. Values: Access List Address Address Mask Active Mode Sets the IP addresses that are permitted or denied access to the printer. Enter a numeric value between 0 and 255 in each field. Sets the subnet mask that are permitted or denied access to the printer. Enter a numeric value between 0 and 255 in each field. Reject Rejects printing from specified network address. Accept Permits printing from specified network address. Off Disables the IP Filter feature for the specified IP address. To configure the IP Filter feature, enter an IP address to be filtered in the Address field and the subnet mask in the Address Mask field. Enter a numeric value between 0 and 255 in each field. "*" is appended to the current value. IP Filter Setup Procedure You can set up to a maximum of five items and the first item set takes priority. When setting multiple filters, enter the shortest address first followed by a slightly longer address, a longer address and so on. Enabling Printing From a Specified User The following describes the procedure to enable printing only from the "192.0.2.1" IP address. 1 Click the first column of the Access List row 1. 2 Enter "192.0.2.1" in the Address field and "255.255.255.255" in the Address Mask field. 3 Select Accept. 4 Click Apply New Settings. Dell™ Printer Configuration Web Tool 169