Dell S2815dn tm Smart Multifunction Printer User Guide - Page 223

Reset Fusing Unit Purpose: To initialize the life counter of the fusing unit. After replacing the fusing unit, be sure to initialize its life counter. Clear Stored Jobs NOTE: Clear Stored Jobs feature is available only when RAM Disk is set to On. Purpose: To clear all files stored as Secure Print, Private Mail Box Print, Public Mail box Print, Proof Print, and Stored Print in the RAM disk. Values: All Secure Document Stored Document Clear Clear Clear Deletes all files stored as Secure Print, Private Mail Box Print, Public Mail Box Print, and Proof Print in the RAM disk. Deletes all files stored as Secure Print in the RAM disk. Deletes all files stored as Stored Print in the RAM disk. Non-Dell Toner Purpose: To use toner cartridge of another manufacturer. CAUTION: Using a non-Dell™ toner cartridge may severely damage your printer. The warranty does not cover damages caused by using non-Dell toner cartridges. Values: Off* Does not use toner cartridge of another manufacturer. On Uses toner cartridge of another manufacturer. Adjust Altitude Purpose: To specify the altitude of the location where the printer is installed. The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are performed by specifying the altitude of the location where the printer is being used. NOTE: An incorrect altitude setting leads to poor printing quality, incorrect indication of remaining toner, etc. Values: 0m* 1000m 2000m 3000m Sets the altitude of the location where the printer is installed. Understanding the Printer Menus 223