Dell S3100 Command Line Reference Guide for the Series 9.112.1 - Page 1117

process (OPTIONAL) Enter the keyword process to reset the OSPF process. Command Modes Command History EXEC Privilege This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.6.1.0 7.5.1.0 pre- 6.1.1.1 Description Introduced on the S3148. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Added support for the Multi-Process OSPF. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. clear ip ospf statistics Clear the packet statistics in interfaces and neighbors. Syntax Parameters clear ip ospf [process-id] [vrf vrf-name] statistics [interface name {neighbor router-id}] process-id vrf vrf-name statistics interface name Enter the OSPF Process ID to clear a specific process. If no Process ID is entered, all OSPF processes are cleared. Enter the keyword vrf followed by the name of the VRF to clear all OSPF routing tables corresponding to that VRF. Enter the keyword statistics to clear the packet statistics in interfaces and neighbors. (OPTIONAL) Enter the keyword interface then one of the following interface keywords and slot/port or number information: Open Shortest Path First (OSPFv2 and OSPFv3) 1117