Dell S3100 Command Line Reference Guide for the Series 9.112.1 - Page 228

Example An ACL rule with a TCP port lt 1023 uses only one entry in the CAM. Dell# Data Mask From To #Covered 1 0000000000000000 1111110000000000 0 1023 1024 Total Ports: 1024 Related Commands • ip access-list extended - create an extended ACL. • permit - assign a permit filter for IP packets. • permit tcp - assign a permit filter for TCP packets. resequence access-list Re-assign sequence numbers to entries of an existing access-list. Syntax Parameters resequence access-list {ipv4 | mac} {access-list-name StartingSeqNum Step-toIncrement} ipv4 | mac access-list-name StartingSeqNum Step-to-Increment Enter the keyword ipv4or mac to identify the access list type to resequence. Enter the name of a configured IP access list, up to 140 characters. Enter the starting sequence number to resequence. The range is from 0 to 4294967290. Enter the step to increment the sequence number. The range is from 1 to 4294967290. Defaults Command Modes None • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 9.0.2.0 8.3.11.1 8.1.1.0 Description Introduced on the S3148. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the Z9000. Introduced on the E-Series (IPv4). 228 Access Control Lists (ACL)