Dell S3100 Command Line Reference Guide for the Series 9.112.1 - Page 994

Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.12.0 Legacy E-Series command. Description Introduced on the S3148. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Usage Information The following describes the show fefd command shown in the following example. Field Interface Mode Interval State Description Displays the interfaces type and number. Displays the mode (aggressive or normal) or NA if the interface contains fefd reset in its configuration. Displays the interval between FEFD packets. Displays the state of the interface and can be one of the following: • bi-directional (interface is up, connected and hearing neighbor's echoes). • err-disabled (only found when FEFD mode is aggressive and when the interface has not hearing its neighbor's echoes for three times the message interval. To reset an interface in this state, use the fefd reset command.) • unknown (only found when FEFD mode is normal. • locally disabled (interface contains the fefd reset command in its configuration). • Admin Shutdown (interface is disabled with the shutdown command). Example Dell# show fefd FEFD is globally 'ON', interval is 10 seconds, mode is 'Aggressive'. INTERFACE MODE Gi 5/1 Gi 5/2 Gi 5/3 Gi 5/4 Gi 5/5 Gi 5/6 Gi 5/7 Gi 5/8 Aggressive Aggressive Aggressive Aggressive Aggressive Aggressive Aggressive Aggressive INTERVAL (second) 10 10 10 10 10 10 10 10 STATE Admin Shutdown Admin Shutdown Admin Shutdown Admin Shutdown Admin Shutdown Admin Shutdown Admin Shutdown Admin Shutdown 994 Layer 2