Dell S3100 Command Line Reference Guide for the Series 9.112.1 - Page 350

interval milliseconds (OPTIONAL) Enter the keywords interval to specify non-default BFD session parameters beginning with the transmission interval. The range is from 50 to 1000. The default is 200. min_rx milliseconds Enter the keywords min_rx to specify the minimum rate at which the local system receives control packets from the remote system. The range is from 50 to 1000. The default is 200. multiplier value Enter the keywords multiplier to specify the number of packets that must be missed in order to declare a session down. The range is from 3 to 50. The default is 3. role [active | passive] Enter the role that the local system assumes: • Active - active system initiates the BFD session. Both systems can be active for the same session. • Passive - passive system does not initiate a session. It only responds to a request for session initialization from the active system. The default is Active. Defaults Command Modes Command History See Parameters. CONFIGURATION This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.11(0.0) 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.3.(0.0) 9.2(1.0) 9.2.(0.0) 8.2.1.0 7.6.1.0 7.4.1.0 Description Introduced the prefix-list keyword. Introduced on the S3148. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on S6000. Introduced on the Z9500. Introduced on Z9000, S4810, and S4820T. Introduced on the E-Series. Introduced on the C-Series. Introduced on the E-Series. ip ospf bfd all-neighbors Establish BFD sessions with all OSPF neighbors on a single interface or use non-default BFD session parameters. Syntax ip ospf bfd all-neighbors [disable | [interval interval min_rx min_rx multiplier value role {active | passive}]] 350 Bidirectional Forwarding Detection (BFD)