Dell S3100 Command Line Reference Guide for the Series 9.112.1 - Page 1624

Example Version 8.3.11.1 8.3.7.0 7.7.1.0 7.5.1.0 6.2.1.1 Description Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Dell(config-stp)# show config protocol spanning-tree 0 no disable Dell(config-stp)# show spanning-tree 0 Display the spanning tree group configuration and status of interfaces in the spanning tree group. Syntax Parameters show spanning-tree 0 [active | brief | guard | interface interface | root | summary] 0 active brief guard interface interface Enter 0 (zero) to display information about that specific spanning tree group. (OPTIONAL) Enter the keyword active to display only active interfaces in spanning tree group 0. (OPTIONAL) Enter the keyword brief to display a synopsis of the spanning tree group configuration information. (OPTIONAL) Enter the keyword guard to display the type of guard enabled on an STP interface and the current port state. (OPTIONAL) Enter the keyword interface and the type slot/port of the interface you want displayed. Type slot/port options are the following: • For a port-channel interface, enter the keywords port-channel then the portchannel ID. • For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. root summary (OPTIONAL) Enter the keyword root to display configuration information on the spanning tree group root. (OPTIONAL) Enter the keyword summary to only the number of ports in the spanning tree group and their state. Command Modes Command History EXEC Privilege This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. 1624 Spanning Tree Protocol (STP)