Dell S3100 Command Line Reference Guide for the Series 9.112.1 - Page 200

Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 Description Introduced on the S3148. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. show ip accounting access-list Display the IP access-lists created on the switch and the sequence of filters. Syntax Parameters show ip accounting {access-list access-list-name | cam_count} interface interface [vrf vrf-name] access-list-name cam_count interface interface Enter the name of the ACL to be displayed. List the count of the CAM rules for this ACL. Enter the keyword interface then the one of the following keywords and the interface information: • For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. • For a port channel interface, enter the keywords port-channel then a number. • For a VLAN interface, enter the keyword vlan then a number from 1 to 4094. in | out vrf vrf-name Identify whether ACL is applied on the ingress or egress side. (Optional) Enter the keyword vrf and then the name of the VRF to view the IP accounting information on either a default or a non-default VRF. Command Modes • EXEC • EXEC Privilege 200 Access Control Lists (ACL)