Dell S3100 Command Line Reference Guide for the Series 9.112.1 - Page 1184

Example Row Heading Hello-Q LSR-Q Other-Q Description The queue, for transmission or reception, for the hello packets. The queue, for transmission or reception, for the link state request packets. The queue, for transmission or reception, for the link state acknowledgement, database description, and update packets. The following describes the error definitions for the show ip ospf statistics process-id global command. Error Type Intf_Down Non-Dr Self-Org Wrong_Len Invld-Nbr Nbr-State Auth-Error MD5-Error Cksum-Err Version AreaMismatch Conf-Issue No-Buffer Seq-no Socket Q-overflow Unknown-Pkt Description Received packets on an interface that is either down or OSPF is not enabled. Received packets with a destination address of ALL_DRS even though SELF is not a designated router. Receive the self originated packet. The received packet length is different to what was indicated in the OSPF header. LSA, LSR, LSU, and DDB are received from a peer which is not a neighbor peer. LSA, LSR, and LSU are received from a neighbor with stats less than the loading state. Simple authentication error. MD5 error Checksum Error Version mismatch Area mismatch The received hello packet has a different hello or dead interval than the configuration. Buffer allocation failure. A sequence no errors occurred during the database exchange process. Socket Read/Write operation error. Packets dropped due to queue overflow. Received packet is not an OSPF packet. Dell# show ip ospf 1 statistics global OSPF Packet Count Total Error Hello DDiscr LSReq LSUpd LSAck RX 10 0 8 2 0 0 0 TX 10 0 10 0 0 0 0 OSPF Global Queue Length TxQ-Len RxQ-Len Tx-Mark Rx-Mark Hello-Q 0 0 0 2 LSR-Q 0 0 0 0 Other-Q 0 0 0 0 Error packets (Only for RX) Intf-Down 0 Wrong-Len 0 Auth-Err 0 Version 0 Non-Dr 0 Invld-Nbr 0 MD5-Err 0 AreaMis 0 Self-Org 0 Nbr-State 0 Chksum 0 Conf-Issues 0 1184 Open Shortest Path First (OSPFv2 and OSPFv3)