Dell S3100 Command Line Reference Guide for the Series 9.112.1 - Page 274

Usage Information Related Commands The set local-preference command changes the LOCAL_PREF attribute for routes meeting the route map criteria. To change the LOCAL_PREF for all routes, use the bgp default local-preference command. • bgp default local-preference - change the default LOCAL_PREF attribute for all routes. set metric To assign a new metric to redistributed routes, configure a filter. Syntax set metric [+ | -] metric-value To delete a setting, enter no set metric. Parameters + metric-value (OPTIONAL) Enter + to add a metric-value to the redistributed routes. (OPTIONAL) Enter - to subtract a metric-value from the redistributed routes. Enter a number as the new metric value. The range is from zero (0) to 4294967295. Defaults Command Modes Command History Not configured. ROUTE-MAP This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.6.1.0 7.5.1.0 pre-6.1.1.0 Description Introduced on the S3148. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Related Commands • set automatic-tag - compute the tag value of the route. • set level - specify the OSPF area for route redistribution. 274 Access Control Lists (ACL)