Dell S3100 Command Line Reference Guide for the Series 9.112.1 - Page 826

E2- OSPF external type 2, i - IS-IS, L1 - IS-IS level-1, L2- IS-IS level-2, IA - IS-IS inter area, * - candidate default, >- non-active route, + - summary route Gateway of last resort is not set Destination Gateway Dist/Metric Last Change R 2.1.0.0/24 via 2.1.4.1, Gi 4/43 120/2 3d0h R 2.1.1.0/24 via 2.1.4.1, Gi 4/43 120/2 3d1h R 2.1.2.0/24 via 2.1.4.1, Gi 4/43 120/1 3d0h R 2.1.3.0/24 via 2.1.4.1, Gi 4/43 120/1 3d1h C 2.1.4.0/24 Direct, Gi 4/43 0/0 3d1h Related Commands • ip prefix-list - enter CONFIGURATION-IP PREFIX-LIST mode and configures a prefix list. • show ip prefix-list summary - display a summary of the configured prefix lists. show ip route summary View a table summarizing the IP routes in the switch. Syntax Parameters show ip route [vrf vrf-name] [summary] vrf vrf-name Enter the keyword vrf followed by the name of the VRF to view information on the IP routes corresponding to that VRF. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.4(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 Description Introduced on the S3148. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Added support for VRF. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. 826 IPv4 Routing