Dell S3100 Command Line Reference Guide for the Series 9.112.1 - Page 1264

Example Field Interface Uptime/expires Ver DR prio/Mode Description Displays the VLAN ID number and slot/port on which the PIM-SM-enabled neighbor was discovered. Displays the amount of time the neighbor has been up then the amount of time until the neighbor is removed from the multicast routing table (that is, until the neighbor hold time expires). Displays the PIM version number: • v2 = PIM version 2 Displays the Designated Router priority and the mode: • 1 = default Designated Router priority (use the ip pim dr-priority command) • DR = Designated Router • S = Sparse mode Dell# show ip pim snooping neighbor Neighbor Interface Uptime/Expires Ver Address 165.87.32.2 Vl 2 [Gi 1/13 ] 00:04:03/00:01:42 v2 165.87.32.10 Vl 2 [Gi 1/11 ] 00:00:46/00:01:29 v2 165.87.32.12 Vl 2 [Gi 2/20 ] 00:00:51/00:01:24 v2 DR Prio 1 0 0 show ip pim snooping tib Display information from the tree information base (TIB) PIM-SM snooping discovered about multicast group members and states. Syntax Parameters show ip pim snooping tib [vlan vlan-id] [group-address [source-address]] vlan vlan-id group-address source-address (OPTIONAL) Enter a VLAN ID to display TIB information PIM-SM snooping discovered on a specified VLAN. The valid VLAN IDs range is from 1 to 4094. (OPTIONAL) Enter the group address in dotted decimal format (A.B.C.D) to display TIB information PIM-SM snooping discovered for a specified multicast group. (OPTIONAL) Enter the source address in dotted decimal format (A.B.C.D) to display TIB information PIM-SM snooping discovered for a specified multicast source. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.10(0.0) 9.8(2.0) 9.8(0.0P5) Description Introduced on the S3148. Introduced on the S3100 series. Introduced on the S4048-ON. 1264 PIM-Sparse Mode (PIM-SM)