Dell S3100 Command Line Reference Guide for the Series 9.112.1 - Page 63

Version 9.0.2.0 8.4.1.0 8.3.19.0 8.3.11.1 8.3.7.0 8.2.1.0 7.6.1.0 7.5.1.0 E-Series Description Introduced on the S6000. Added IPv6 addressing support for FTP, TFTP, and SCP. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Added usbflash and rpm0usbflash commands on E-Series. Introduced on the S-Series and added the SSH port number to the SCP prompt sequence on all systems. Introduced on the C-Series. Original command. Usage Information Dell Networking OS supports a maximum of 100 files at the root directory level on both the internal and external flash. When copying a file to a remote location (for example, using Secure Copy [SCP]), enter only the keywords and Dell Networking OS prompts you for the rest of the information. For example, when using SCP, you can enter copy running-config scp: where running-config is the source and the target is specified in the ensuing prompts. Dell Networking OS prompts you to enter any required information for the named destination - remote destination, destination filename, user ID, password, and so forth. When you use the copy running-config startup-config command to copy the running configuration to the startup configuration file, Dell Networking OS creates a backup file on the internal flash of the startup configuration. When you load the startup configuration or a configuration file from a network server such as TFTP to the running configuration, the configuration is added to the running configuration. This does not replace the existing running configuration. Commands in the configuration file has precedence over commands in the running configuration. Dell Networking OS supports copying the running-configuration to a TFTP server, an FTP server, or a remote NFS file system. For example: • copy running-config tftp: • copy running-config ftp: • copy running-config nfsmount:///filepath You can compress the running configuration by grouping all the VLANs and the physical interfaces with the same property. You can store the operating configuration to the startup config in Compressed mode and perform an image downgrade without any configuration loss. Example Dell#copy running-config scp: Address or name of remote host []: 192.168.1.1 Port number of the server [22]: 22 Destination file name [startup-config]: User name to login remote host: username Password to login remote host: ! 4080 bytes successfully copied Dell# File Management 63