Dell S3100 Command Line Reference Guide for the Series 9.100.1 - Page 1108

• Clear everything and revert to the default behavior. • All previously marked passive interfaces are removed. • May update ABR status. On configuring suppression using the passive-interface command, the state of the OSPF neighbor does not change to INIT; instead, the state of the OSPF neighbor changes to DOWN after the dead-timer expires. redistribute Redistribute information from another routing protocol throughout the OSPF process. Syntax redistribute {connected | isis | ospf | rip | static} [metric metric-value | metric-type type-value] [route-map map-name] [tag tag-value] To disable redistribution, use the no redistribute {connected | isis | rip | static} command. Parameters connected isis ospf rip static metric metricvalue metric-type typevalue Enter the keyword connected to specify that information from active routes on interfaces is redistributed. Enter the keyword isis to specify that ISO IS-IS information is redistributed. Enter the keyword ospf to specify that information corresponding to OSPF is redistributes. Enter the keyword rip to specify that RIP routing information is redistributed. Enter the keyword static to specify that information from static routes is redistributed. (OPTIONAL) Enter the keyword metric then a number. The range is from 0 (zero) to 16777214. (OPTIONAL) Enter the keywords metric-type then one of the following: • 1 = OSPF External type 1 • 2 = OSPF External type 2 route-map mapname tag tag-value (OPTIONAL) Enter the keywords route-map then the name of the route map. (OPTIONAL) Enter the keyword tag then a number. The range is from 0 to 4294967295. Defaults Not configured. Command Modes ROUTER OSPF Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.10(0.0) Description Introduced on the S3148. Open Shortest Path First (OSPFv2 and OSPFv3) 1108