Dell S3100 Command Line Reference Guide for the Series 9.100.1 - Page 795

Example Related Commands Version 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.6.1.0 7.5.1.0 pre-6.1.1.0 Description Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Dell# show ip route list test Codes:C- connected, S - static, R - RIP, B- BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated, O- OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1, N2- OSPF NSSA external type 2, E1 - OSPF external type 1, E2- OSPF external type 2, i - IS-IS, L1 - IS-IS level-1, L2- IS-IS level-2, IA - IS-IS inter area, * - candidate default, >- non-active route, + - summary route Gateway of last resort is not set Destination Gateway Dist/Metric Last Change R 2.1.0.0/24 via 2.1.4.1, Gi 4/43 120/2 3d0h R 2.1.1.0/24 via 2.1.4.1, Gi 4/43 120/2 3d1h R 2.1.2.0/24 via 2.1.4.1, Gi 4/43 120/1 3d0h R 2.1.3.0/24 via 2.1.4.1, Gi 4/43 120/1 3d1h C 2.1.4.0/24 Direct, Gi 4/43 0/0 3d1h • ip prefix-list - enter CONFIGURATION-IP PREFIX-LIST mode and configures a prefix list. • show ip prefix-list summary - display a summary of the configured prefix lists. show ip route summary View a table summarizing the IP routes in the switch. Syntax Parameters show ip route [vrf vrf-name] [summary] vrf vrf-name Enter the keyword vrf followed by the name of the VRF to view information on the IP routes corresponding to that VRF. Command Modes • EXEC • EXEC Privilege IPv4 Routing 795