Dell S3100 Command Line Reference Guide for the Series 9.100.1 - Page 318

ip access-group Apply an egress IP ACL to the ACL VLAN group. Syntax Parameters ip access-group {group name} out implicit-permit group-name out implicit-permit Enter the name of the ACL VLAN group where you want the egress IP ACLs applied, up to 140 characters. Enter the keyword out to apply the ACL to outgoing traffic. Enter the keyword implicit-permit to change the default action of the ACL from implicit-deny to implicit-permit (that is, if the traffic does not match the filters in the ACL, the traffic is permitted instead of dropped). Default None Command Modes CONFIGURATION (conf-acl-vl-grp) Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.10(0.0) 9.8(2.0) 9.8(0.0P5) 9.8(0.0P2) 9.3.(0.0) Description Introduced on the S3148. Introduced on the S3100 series. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S4810, S4820T, and Z9000 platforms. Usage Information You can apply only an egress IP ACL on an ACL VLAN group. show acl-vlan-group Display all the ACL VLAN groups or display a specific ACL VLAN group, identified by name. Syntax Parameters show acl-vlan-group {group-name | detail} group-name (Optional) Display only the ACL VLAN group that is specified, up to 140 characters. detail Display information in a line-by-line format to display the names in their entirety. Without the detail option, the output displays in a table style and information may be truncated. Default No default behavior or values Command Modes EXEC EXEC Privilege Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM) 318