Dell S3100 Command Line Reference Guide for the Series 9.100.1 - Page 1177

spi : 600 (0x258) transform : esp-des esp-sha1-hmac in use settings : {Transport, } replay detection support : N STATUS : ACTIVE outbound esp sas spi : 600 (0x258) transform : esp-des esp-sha1-hmac in use settings : {Transport, } replay detection support : N STATUS : ACTIVE show crypto ipsec sa ipv6 Command Fields Field Description Interface IPv6 interface Link local address IPv6 address of interface IPSecv6 policy name Name of the IPsec security policy applied to the interface. inbound/outbound Authentication policy applied to inbound or outbound traffic. ah inbound/outbound Encryption policy applied to inbound or outbound traffic. esp spi Security policy index number used to identify the policy. transform Security algorithm that is used to provide authentication, integrity, and confidentiality. in use settings Transform that the SA uses (only transport mode is supported). replay detection support Y: An SA has enabled the replay detection feature. N: The replay detection feature is not enabled. STATUS ACTIVE: The authentication or encryption policy is enabled on the interface. show ipv6 ospf database Display information in the OSPFv3 database, including link-state advertisements (LSAs). Syntax Parameters show ipv6 ospf [process-number] [vrf vrf-name] database [database-summary | grace-lsa] process-number vrf vrf-name Enter the OSPF process number. (Optional) Enter the keyword vrf followed by the name of the VRF to display neighbors corresponding to that VRF. NOTE: If you do not specify this option, neighbors corresponding to the default VRF are displayed. Open Shortest Path First (OSPFv2 and OSPFv3) 1177