Dell S3100 Command Line Reference Guide for the Series 9.100.1 - Page 142

265 bcmLINK.0 117927936 0 0 0 0 0 output truncated Dell# show software ifm Display interface management (IFM) data. Syntax Parameters show software ifm {clients [summary] | ifagt number | ifcb interface | stackunit unit-ID | trace-flags} clients summary ifagt number ifcb interface Enter the keyword clients to display IFM client information. (OPTIONAL) Enter the keyword summary to display brief information about IFM clients. Enter the keyword ifagt then the number of an interface agent to display software pipe and IPC statistics. Enter the keyword ifcb then one of the following interface IDs then the interface information to display interface control block information for that interface: • For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. stack-unit unit-ID trace-flags Enter the keyword stack-unit then the stack member number to display IFM information for that unit. Enter the keyword trace-flags to display IFM information for internal trace flags. Defaults None. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.10(0.0) 9.8(1.0) 9.7(0.0) 9.2(1.0) 9.0.2.0 9.0.0.0 8.3.19.0 8.3.12.0 8.3.11.1 Description Introduced on the S3148. Introduced on the Z9100-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the Z9000. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Control and Monitoring 142