Dell S3100 Command Line Reference Guide for the Series 9.100.1 - Page 436

Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.4.(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.7.1.0 Description Introduced on the S3148. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Added the ipv4 multicast and ipv6 unicast parameters. Added support for VRF. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Usage Information The following describes the show ip bgp flap command shown in the following example. Field Network From Flaps Duration Reuse Path Description Displays the network ID to which the route is flapping. Displays the IP address of the neighbor advertising the flapping route. Displays the number of times the route flapped. Displays the hours:minutes:seconds since the route first flapped. Displays the hours:minutes:seconds until the flapped route is available. Lists all the ASs the flapping route passed through to reach the destination network. Example Dell# show ip bgp flap-statistics BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0 BGP local router ID is 192.168.11.5 Status codes: s suppressed, S stale, d dampened, h history, * valid, > best Path source: I - internal, a - aggregate, c - confed-external, r - redistributed n - network, D - denied, S - stale Origin codes: i - IGP, e - EGP, ? - incomplete Network From h 77.0.0.0/24 172.16.0.2 d 55.0.0.0/24 172.16.0.2 *> 66.0.0.0/24 172.16.0.2 *>n 66.66.77.77/32 0.0.0.0 0 Dell# Flaps Duration 1 00:00:03 3 00:00:25 1 00:00:23 32768 i Reuse Path 00:00:00 00:30:44 200 i 00:00:00 200 i Border Gateway Protocol 436