Dell S3100 Command Line Reference Guide for the Series 9.100.1 - Page 1343

Version 9.8(0.0P5) 9.8(0.0P2) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 pre- 6.2.1.1 Description Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series. redistribute ospf Redistribute routing information from an OSPF process. Syntax redistribute ospf process-id [match external {1 | 2} | match internal | metric metric-value] [route-map map-name] To disable redistribution, use the no redistribute ospf process-id [match external {1 | 2} | match internal | metric metric-value] [route-map map-name] command. Parameters process-id Enter a number that corresponds to the OSPF process ID to redistribute. The range is from 1 to 65355. match external {1 | (OPTIONAL) Enter the keywords match external then the numbers 1 or 2 to 2} indicated that external 1 routes or external 2 routes should be redistributed. match internal (OPTIONAL) Enter the keywords match internal to indicate that internal routes should be redistributed. metric metricvalue (OPTIONAL) Enter the keyword metric then a number as the metric value. The range is from 0 to 16. route-map map- (OPTIONAL) Enter the keywords route-map then the name of a configured route name map. Defaults Not configured. Command Modes ROUTER RIP Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) Description Introduced on the S3148. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Routing Information Protocol (RIP) 1343