Dell S3100 Command Line Reference Guide for the Series 9.100.1 - Page 395

Version 8.3.11.1 8.3.7.0 7.8.1.0 7.7.1.0 Description Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Usage Information If you configure the neighbor maximum-prefix command and the neighbor receives more prefixes than the neighbor maximum-prefix command configuration allows, the neighbor goes down and the show ip bgp summary command displays (prfxd) in the State/PfxRcd column for that neighbor. The neighbor remains down until you enter the clear ip bgp command for the neighbor or the peer group to which the neighbor belongs or you enter the neighbor shutdown and neighbor no shutdown commands. Related Commands • show ip bgp summary - display the current BGP configuration. neighbor next-hop-self Allows you to configure the router as the next hop for a BGP neighbor. Syntax neighbor {ip-address | peer-group-name} next-hop-self [all] To return to the default setting, use the no neighbor {ip-address | peer-group-name} nexthop-self [all] command. Parameters ip-address Enter the IP address of the neighbor in dotted decimal format. peer-group-name Enter the name of the peer group. all Specifies that the route reflector is the next hop for both iBGP and eBGP-learned routes. Defaults Disabled. Command Modes ROUTER BGP Command History Version 9.10(0.0) 9.10(0.0) 9.2(1.0) 9.0.2.0 8.3.7.0 7.8.1.0 7.7.1.0 Description Introduced on the S3148. Introduced the all keyword on the S4810, S4820, S4048-ON, S3048-ON, S3100 series, S6010-ON, S4040T-ON, S5000, S6000, S6000-ON, S6100-ON, Z9100-ON, and Z9500. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Usage Information If you configure the set next-hop command in ROUTE-MAP mode, the configuration takes precedence over the neighbor next-hop-self command. Border Gateway Protocol 395