Dell S3100 Command Line Reference Guide for the Series 9.100.1 - Page 677

Example Related Commands Version 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 8.5.1.0 8.1.1.0 7.6.1.0 7.5.1.0 7.4.1.0 Description Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Added support for 4-port 40G line cards on the E-Series. Introduced on the E-Series. Introduced on the S-Series. Introduced on the C-Series. Introduced Dell# show interfaces dampening Interface Supp Flaps Penalty Half-Life Reuse Suppress Max-Sup State Gi 1/2 Up 0 0 20 800 4500 120 Gi 1/10 Up 0 0 5 750 2500 20 Dell# • dampening - configure dampening on an interface. • show interfaces - display information on a specific physical interface or virtual interface. • show interfaces configured - display any interface with a non-default configuration. show interfaces eee Display whether EEE is enabled on interfaces.. Syntax Parameters show interfaces [interface-type [slot/port | slot/port-range]] eee interface-type Enter the interface information as GigabitEthernet or TenGigabitEthernet followed by the slot and the port number or range of port numbers. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.10(0.1) Description Introduced on the S3100 series, S4820T, and S5000. Usage Information The show interfaces eee command displays whether EEE has been enabled and shows the status of all the interfaces. Use the show interfaces interface-type slot/port eee command to view the status of EEE on the specified port. Interfaces 677