Dell S3100 Command Line Reference Guide for the Series 9.100.1 - Page 1576

Dell# LACP: STP: SPAN: CRYPTOMGR: no block sync done no block sync done no block sync done succeeded Feb 25 2016 00:11:35 show system stack-ports Display information about the stacking ports on all switches in the stack. Syntax Parameters show system stack-ports [status | topology] status topology (OPTIONAL) Enter the keyword status to display the command output without the Connection field. (OPTIONAL) Enter the keyword topology to limit the table to just the Interface and Connection fields. Defaults Command Modes none • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.10(0.0) 9.10(0.0) 9.8(2.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 8.3.19.0 8.3.7.0 8.3.11.1 Description Introduced on the S3148. Increased the stacking range to 12 units in S3100 series. Introduced on the S3100 series. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Usage Information The following describes the show system stack-ports command shown in the following example. Field Description Topology Lists the topology of stack ports connected: Ring, Daisy chain, or Standalone. Interface The unit/port ID of the connected stack port on this unit. Link Speed Link Speed of the stack port (10 or 40) in Gb/s. Admin Status The only currently listed status is Up. Connection The stack port ID to which this unit's stack port is connected. Example Dell#show system stack-ports Topology: Ring Stacking 1576