Dell W-7030 AOS 6.4.x CLI Reference Guide - Page 10

Command show whitelist-db cpsecstatus tunnel-group voice real-time-config vrrp whitelist-db cpsec add whitelist-db cpsec modify wlan virtual-ap Description The Whitelist-sync is enabled parameter is introduced as part of the command output. The tunnel ID limit is changed from 2147483647 to 16777215. The default value is changed to enabled. The holdtime parameter is introduced. The ap-group and ap-name parameters are introduced. The ap-group and ap-name parameters are introduced. The wan-operation parameter is introduced. Commands in ArubaOS 6.4.2.5 Modified Commands The following commands are modified in ArubaOS 6.4.2.5: Command aaa authentication-server radius Description The cppm parameter is introduced. firewall The optimize-dad-frames parameter is introduced. show aaa authenticationserver radius The CPPM credentials parameter is introduced. show firewall The Optimize Duplicate Address Detection frames parameter is introduced. show running-config The default dot1x high-watermark and dot1x low-watermark values were removed from the show running-config command. show web-server The Enable bypass captive portal landing page parameter is introduced. tar The show dot1x watermark history is added as part of the techsupport.log file. web-server profile The bypass-cp-landing-page parameter is introduced. 10 | The ArubaOS Command-Line Interface Dell Networking W-Series ArubaOS 6.4.x | User Guide