Dell W-7030 AOS 6.4.x CLI Reference Guide - Page 1852

Parameter Management Frame Throttle Limit Description Maximum number of management frames that can come in from this radio in each throttle interval. ARM/WIDS Override If enabled, this option disables Adaptive Radio Management (ARM) and Wireless IDS functions and slightly increases packet processing performance. If a radio is configured to operate in Air Monitor mode, then the ARM/WIDS override functions are always enabled, regardless of whether or not this check box is selected. Reduce Cell Size (Rx Sensitivity) Protection for 802.11b Clients The cell size reduction feature allows you manage dense deployments and to increase overall system performance and capacity by shrinking an AP's receive coverage area, thereby minimizing co-channel interference and optimizing channel reuse. The possible range of values for this feature is 0-55 dB. The default 0 dB reduction allows the radio to retain its current default Rx sensitivity value. Shows if the profile has enabled or disabled protection for 802.11b clients. Adaptive Radio Management (ARM) Profile Name of an Adaptive Radio Management profile associated with this 802.11a profile. High-throughput Radio Profile Name of a High Throughput Radio profile associated with this 802.11a profile. Maximum Distance Maximum distance between a client and an AP or between a mesh point and a mesh portal, in meters. This value is used to derive ACK and CTS timeout times. A value of 0 specifies default settings for this parameter, where timeouts are only modified for outdoor mesh radios which use a distance of 16km. Spectrum Monitoring If enabled, the AP operates as a hybrid AP that can simultaneously serve clients and monitor a single channel for spectrum analysis data. Spectrum Monitoring Profile The spectrum monitoring profile referenced by APs using this 802.11g radio profile. For details, see rf spectrum-profile on page 784 AM Scanning Profile The AM scanning profile referenced by APs using this 802.11g radio profile. For details, seerf am-scan-profile on page 734 Command History Release ArubaOS 3.0 ArubaOS 3.3.2 ArubaOS 3.4 Modification Command introduced Introduced protection for 802.11b clients and support for the highthroughput IEEE 802.11n standard Support for the following parameters: Dell Networking W-Series ArubaOS 6.4.x | User Guide show rf dot11g-radio-profile | 1852