Dell W-7030 AOS 6.4.x CLI Reference Guide - Page 1838

Parameter Multi Band Scan Rogue AP Aware Scan Interval Aggressive Scanning Active Scan Scanning Scan Time VoIP Aware Scan Power Save Aware Scan Video Aware Scan Ideal Coverage Index Acceptable Coverage Index Description If enabled, single-radio APs will try to scan across bands for rogue AP detection. If enabled, Dell APs may change channels to contain off-channel rogue APs with active clients. This security features allows APs to change channels even if the Client Aware setting is disabled. This setting is disabled by default, and should only be enabled in highsecurity environments where security requirements are allowed to consume higher levels of network resources. You may prefer to receive Rogue AP alerts via SNMP traps or syslog events. If Scanning is enabled, the Scan Interval defines how often the AP will leave its current channel to scan other channels in the band. Off-channel scanning can impact client performance. Typically, the shorter the scan interval, the higher the impact on performance. If you are deploying a large number of new APs on the network, you may want to lower the Scan Interval to help those APs find their optimal settings more quickly. Raise the Scan Interval back to its default setting after the APs are functioning as desired. When the aggressive scanning feature is enabled, an AP radio with no clients will scan channels every second. If enabled, the AP initiates active scanning via probe request. This option elicits more information from nearby APs, but also creates additional management traffic on the network. Active Scan is disabled by default, and should not be enabled except under the direct supervision of Dell Support. Shows if the AP has enabled or disabled AP scanning of other channels. The amount of time, in milliseconds, an AP will drift out of the current channel to scan another channel. Shows if Dell's VoIP Call Admission Control (CAC) prevents any single AP from becoming congested with voice calls. If CAC is enabled, you should also enable VoIP Aware Scan in the ARM profile, so the AP will not attempt to scan a different channel if one of its clients has an active VoIP call. When enabled, the AP will not scan if Power Save is active. If Video Aware Scan is enabled in the ARM profile, the AP will not attempt to scan a different channel if one of its clients has an active video session. The coverage that the AP should try to achieve on its channel. The denser the AP deployment, the lower this value should be. The minimal coverage that the AP should try to achieve on its channel. The denser the AP deployment, the lower this value should be. Dell Networking W-Series ArubaOS 6.4.x | User Guide show rf arm-profile | 1838