Dell W-7030 AOS 6.4.x CLI Reference Guide - Page 20

Command Description l allow-stun l dpi l stall-crash ha The following parameters are introduced to support the high availability inter-controller heartbeat, controller oversubscription and state synchronization features. l heartbeat: l heartbeat-interval l heartbeat-threshold l over-subscription l pre-shared-key l state-sync interface fastethernet | gigabitethernet The lldp parameter is introduced. interface vlan The dhcp parameter for configuring dynamic host configuration protocol for IPv6 is introduced. interface tunnel Tunnel destination ipv6, tunnel mode gre ipv6, tunnel source ipv6, parameters are introduced. ip access-list session The redirect parameter is introduced under action. The app, and appcategory parameters are introduced under service. ip igmp The ssm-range parameter is introduced. ipv6 mld The ssm-range parameter is introduced. ipv6 route The vlan parameter is introduced. ntp server The IPv6 parameter is introduced. show aaa authentication-server radius The called-station-id parameter is introduced as part of this command output. show airgroup The dlna and mdns parameters are introduced as part of the following command outputs: l show airgroup blocked-queries l show airgroup blocked-service-id l show airgroup internal-state statistics The dlna, mdns , and verbose parameters are introduced as part of the following command outputs: 20 | The ArubaOS Command-Line Interface Dell Networking W-Series ArubaOS 6.4.x | User Guide