Dell W-7030 AOS 6.4.x CLI Reference Guide - Page 747

Parameter ps-aware-scan rogue-ap-aware scan-interval scan-mode scanning Description When enabled, the AP will not scan if Power Save is active. Range - When enabled, the AP will try to - contain off-channel rogue APs. If scanning is enabled, the scan interval defines how often the AP will leave its current channel to scan other channels in the band. Offchannel scanning can impact client performance. Typically, the shorter the scan interval, the higher the impact on performance. If you are deploying a large number of new APs on the network, you may want to lower the Scan Interval to help those APs find their optimal settings more quickly. Raise the Scan Interval back to its default setting after the APs are functioning as desired. Recommended Values: 0-30 seconds 0-2,147,483, 647 seconds Select the scan mode for the AP: - l all-reg-domain: The AP scans channels within all regulatory domains. This is the default setting. l reg-domain:Limit the AP scans to just the regulatory domain for that AP. The Scanning checkbox enables or - disables AP scanning across multiple channels. Disabling this option also disables the following scanning features: l Multi Band Scan l Rogue AP Aware l Voip Aware Scan l Power Save Scan Do not disable Scanning unless you want to disable ARM and manually configure AP channel and transmission power. Default disabled disabled 10 seconds all-regdomain enabled 747 | rf arm-profile Dell Networking W-Series ArubaOS 6.4.x | User Guide