Dell W-7030 AOS 6.4.x CLI Reference Guide - Page 4

Command routing-policy-map show ap debug radar-logs show ap debug radio-info show auth-survivability show branch show branch-config-group show branch-dhcp-pool show ip nexthop-list show local-userdb-branch show log arm-user-debug show pan-gp show pan-options show wlan anyspot-profile wlan anyspot-profile Description This command associates a routing access control list (ACL) with a user role. Displays the latest four RADAR event logs from the AP. Displays the Wi-Fi radio debug logs from the AP driver. This command displays the auth-survivability parameters that are configured in the local controller. Shows configuration and DHCP address settings on a branch controller. The output of this command shows configuration settings for a branch config group. The output of this command shows a summary of DHCP pool information for branch controllers. Display nexthop list settings for policy-based routing. The output of this command lists the MAC address and assigned branch config group for branch controllers associated with that master. This command displays a user's ARM debug logs. This command displays Palo Alto Networks portal or gateway settings on a branch or local controller. This command displays configured options to integrate a branch controller with a Palo Alto Networks (PAN) firewall. The output of this command displays configuration settings for a WLAN anyspot profile. This command configures the anyspot client probe suppression feature, which decreases network traffic by suppressing probe requests from clients attempting to locate and connect to other known networks. Modified Commands The following commands are modified in ArubaOS 6.4.3.0: 4 | The ArubaOS Command-Line Interface Dell Networking W-Series ArubaOS 6.4.x | User Guide