Dell W-7030 AOS 6.4.x CLI Reference Guide - Page 741

Parameter client-aware Description Range If the Client Aware option is enabled, - the AP does not change channels if there is active client traffic on that AP. If Client Aware is disabled, the AP may change to a more optimal channel, but this change may also disrupt current client traffic. client match The client match feature helps - optimize network resources by balancing clients across channels, regardless of whether the AP or the controller is responding to the wireless client's probe requests. If enabled, the controller compares whether or not an AP has more clients than its neighboring APs on other channels. If an AP's client load is at or over a predetermined threshold as compared to its immediate neighbors, or if a neighboring Dell AP on another channel does not have any clients, load balancing will be enabled on that AP. This feature is enabled by default clone Name of an existing ARM profile from - which parameter values are copied. cm-band-a-min-signal targeted A band radio in a Client Match band steer move (-dBm). cm-band-g-max-signal radio that can trigger a Client Match band steer move (-dBm) cm-dot11v Client Match steers using 802.11v - BSS Transition Management. cm-lb-client-thresh If an AP radio has fewer clients than the client match load balancing threshold defined by this parameter, the AP will not participate in load balancing. 0-100 clients Default enabled enabled - 75 45 enabled 30 741 | rf arm-profile Dell Networking W-Series ArubaOS 6.4.x | User Guide