Dell W-7030 AOS 6.4.x CLI Reference Guide - Page 2011

show voice trace show voice trace lync [count | ip | mac ] sccp [count | ip | mac ] sip [count | ip | mac ] Description Displays the signaling message trace details for either Lync ALG, Signaling Connection Control Part (SCCP), or Session Initiation Protocol (SIP) clients. Syntax Parameter count ip mac Description View the specified number of the latest SIP, SCCP, or Lync voice client messages. Specify an integer value. Specify the IP address of a client to display its SIP, SCCP, or Lync voice client messages. Specify the IP address of a client to display its SIP, SCCP, or Lync voice client messages. Example The output of this command shows signaling message trace. The first example shown is for a SIP client. (host) #show voice trace sip count 4 SIP Voice Client(s) Message Trace ALG Client Name Client(MAC) SIP 6201 00:24:7d:99:49:01 SIP 6201 00:24:7d:99:49:01 SIP 6201 00:24:7d:99:49:01 SIP 6201 00:24:7d:99:49:01 Client(IP) ---------10.15.20.59 10.15.20.59 10.15.20.59 10.15.20.59 Event Time ---------Aug 17 10:21:22 Aug 17 10:21:22 Aug 17 10:21:22 Aug 17 10:21:22 Direction --------Server-To-Client Client-To-Server Server-To-Client Client-To-Server Msg --200_OK REGISTER 4XX_REQUEST_FAILURE REGISTER BSSID ----00:1a:1e:a8:2d:80 00:1a:1e:a8:2d:80 00:1a:1e:a8:2d:80 00:1a:1e:a8:2d:80 Num of Rows:4 The second example shown is for Lync ALG, displaying the exchange between a Lync server and Lync client. The output is divided into multiple sections to better fit on the pages of this document. In the actual command-line interface, it appears in a single, long table. (host) #show voice trace lync Lync Voice Client(s) Message Trace ALG Client Name Client(MAC) Client(IP) Event Time 2011 | show voice trace Dell Networking W-Series ArubaOS 6.4.x | User Guide