Dell W-7030 AOS 6.4.x CLI Reference Guide - Page 8

Command show ap wired stats show cp-bwcontracts show datapath show ip ospf show interface vlan show port stats show port status show spantree show ucc call-info cdrs Description l EIRP l Flag l Active Media Sessions Additionally, the all parameter is introduced. This command now displays results for both campus and Remote access points. The CP bw contracts table now lists the traffic rate in packets/second instead of bits/second. The following changes were introduced: l The compression parameter displays datapath compression statistics. By default, the combined statistics for all CPUs are shown. l The output of the show datapath session command now supports the r flag,which indicates that the session was routed through a nexthop device defined by a nexthop-list. For more information, see ip nexthop-list. l The output of the show datapath cp-bwm command now displays the rate in pps. The tunnel ID limit is changed from 2147483647 to 16777215. The DHCP Option-82 AP name and ESSID are configured on this Interface parameter is introduced. The PC # (port-channel) value is introduced under the Port column. Following values are introduced: l The PC# (port-channel) value is introduced under the PortMode column. l The PC (port-channel) value is introduced under the PortType column. l Speed and Duplex columns are introduced. The BpduGuard field is introduced as part of this command output. The UCC-Band, MOS, and MOS-Band fields are introduced as part of the show ucc call-info cdrs command output. Following changes are made as part of the show ucc call-info cdrs cid command output: l Moved the UCC Score, Client Health, MOS parameters from the CDR-Basic section to the Call Samples section heading. l Added a new Call Sample(per 60 secs) section heading. This section displays the properties of media session like IP, port, 8 | The ArubaOS Command-Line Interface Dell Networking W-Series ArubaOS 6.4.x | User Guide