Dell W-7030 AOS 6.4.x CLI Reference Guide - Page 765

Parameter channel clone csa 765 | rf dot11g-radio-profile Description that it cannot hear. Range Channel number for the AP 802.11g/802.11n.802.11ac physical layer. The available channels depend on the regulatory domain (country). Channel number configuration options for 20 MHz, 40 MHz, and 80 Mhz modes: l num: Entering a channel number disables 40 MHz mode and activates 20 MHz mode for the entered channel. l num+: Entering a channel number with a plus (+) sign selects a primary and secondary channel for 40 MHz and 80 Mhz modes. The number entered becomes the primary channel and the secondary channel is determined by increasing the primary channel number by 4. Example: 157+ represents 157 as the primary channel and 161 as the secondary channel. l num-: Entering a channel number with a minus (-) sign selects a primary and secondary channel for 40 MHz and 80 Mhz modes. The number entered becomes the primary channel and the secondary channel is determined by decreasing the primary channel number by 4. Example: 157- represents 157 as the primary channel and 153 as the secondary channel. NOTE: 20 MHz clients are allowed to associate when a primary and secondary channel are configured; however, the client will only use the primary channel. Depends on regulatory domain Name of an existing radio profile - from which parameter values are copied. Default - - Channel Switch Announcement - (CSA), as defined by IEEE 802.11h, allows an AP to announce that it is switching to a new channel before it begins transmitting on that channel. disabled Dell Networking W-Series ArubaOS 6.4.x | User Guide