Dell W-7030 AOS 6.4.x CLI Reference Guide - Page 759

Parameter spectrum-loadbalancing spectrum-monitoring spectrum-profile tpc-power tx-power Description Range The Spectrum Load Balancing feature - helps optimize network resources by balancing clients across channels, regardless of whether the AP or the controller is responding to the wireless clients' probe requests. If enabled, the controller compares whether or not an AP has more clients than its neighboring APs on other channels. If an AP's client load is at or over a predetermined threshold as compared to its immediate neighbors, or if a neighboring Dell AP on another channel does not have any clients, load balancing will be enabled on that AP. This feature is disabled by default. Default disabled Issue this command to turn APs in ap- - mode into a hybrid AP. An AP in hybrid AP mode will continue to serve clients as an access point while it scans and analyzes spectrum analysis data for a single radio channel. For further details on using hybrid APs and spectrum monitors to examine the radio frequency (RF) environment in which the Wi-Fi network is operating, refer to the Spectrum Analysis chapter of the Dell Networking W-Series ArubaOS User Guide. For a list of APs that can be converted into a spectrum monitor or hybrid AP, refer to the Spectrum Analysis chapter of the Dell Networking W-Dell Networking W-Series ArubaOS 6.4.x User Guide. default Specify the rf spectrum profile used by - hybrid APs and spectrum monitors. This profile sets the spectrum band and device ageout times used by a spectrum monitor or hybrid AP radio. For details, see rf spectrum-profile on page 784. default The transmit power advertised in the TPC IE of beacons and probe responses. Range: 0-51 dBm 0-51 dBm 15 dBm Sets the initial transmit power (dBm) on which the AP operates, unless a better choice is available through calibration . This parameter can be set from 0 to 51 in .5 dBm increments, or set to the regulatory maximum value of 127 dBm. 0-51 dBm, 127 dBm 14 dBm 759 | rf dot11a-radio-profile Dell Networking W-Series ArubaOS 6.4.x | User Guide