Dell W-7030 AOS 6.4.x CLI Reference Guide - Page 3

The ArubaOS Command-Line Interface The Dell Networking W-Series ArubaOS 6.4.x command-line interface (CLI) allows you to configure and manage Dell controllers. The CLI is accessible from a local console connected to the serial port on the controllers or through a Telnet or Secure Shell (SSH) session from a remote management console or workstation. Telnet access is disabled by default. To enable Telnet access, enter the telnet CLI command from a serial connection or an SSH session, or in the WebUI navigate to the Configuration > Management > General page. What's New In ArubaOS 6.4.x This section lists the commands introduced, modified, or deprecated in ArubaOS 6.4.x. Commands in ArubaOS 6.4.3.0 New Commands The following commands are introduced in ArubaOS 6.4.3.0: Command aaa auth-survivability Description This command configures authentication survivability on a controller. amon msg-buffer-size This command modifies the AMON packet size on the controller. clear aaa auth-survivabilitycache This command, introduced with this release, allows you to clear the data stored in the local Survival Server cache crypto_local isakmp disableipcomp This command disables IP compression on the master controller. disable-whitelist-sync This command disables whitelist synchronization with local or Cloud Services Controller on the master controller. ip access-list route This command configures an access control list (ACL) for policy-based packet routing. ip nexthop-list A next hop IP is the IP address of an adjacent router or device with layer-2 connectivity to the controller. Use this command to configure a next hop list, providing redundancy for the next hop devices by forwarding the traffic to a backup next hop device in case of failures. ip probe This command configures WAN health-check ping-probes for measuring WAN availability and latency. pan-options This command configures options to integrate a branch controller with a Palo Alto Networks (PAN) firewall Dell Networking W-Series ArubaOS 6.4.x| User Guide The ArubaOS Command-Line Interface | 3