Dell W-7030 AOS 6.4.x CLI Reference Guide - Page 2230

Parameter idp-cert mgmt-auth Description Range Specifies the IDP certificate name con- - figured in the controller Default - Specifies the authentication method for the management user; you can choose to use either username/password or certificates, or both username/password and certificates. usernam e/ passwor d, certificat e usernam e/ passwor d no Negates any configured - - parameter. session-timeout Specifies the amount of time after which the WebUI session times out and requires login for continued access. 30-3600 seconds 900 seconds ssl-protocol Specifies the Secure Sockets Layer - (SSL) or Transport Layer Security (TLS) protocol version used for securing communication with the web server: l TLS v1 l TLS v1.1 l TLS v1.2 tlsv1 tlsv1.1 tlsv1.2 switch-cert Specifies the name of the server - certificate associated with WebUI access. Use the show crypto-local pki ServerCert command to see the server certificates installed in the controller. default web-https-port-443 web-lync-listen-port {http }| {https } web-max-clients Enables WebUI access on the HTTPS - port (443) .When you connect to the WebUI using https (tcp port 443), the controller continues using port 443 and no longer redirects to port 4343. Configures the port number on which Lync Network Diagnostic (LND), a Microsoft® plug-in, sends HTTP/HTTPS messages to Dell controller. NOTE: Disable the media classification ACL before using this feature. See ip access-list session. 102465535 Configures the web server's maximum number of supported concurrent clients. 25-320 - 0 (feature disabled) 25 Dell Networking W-Series ArubaOS 6.4.x | User Guide web-server profile | 2230