Dell W-7030 AOS 6.4.x CLI Reference Guide - Page 13

Command firewall ip access-list session provision-ap rf dot11g-radio-profile show ap database show ap debug lacp show ap debug systemstatus show ap details show datapath Description l The web-cc parameter is introduced. This parameter enables web content classification for all HTTP traffic. Once enabled, ArubaOS enforces ACLs and bandwidth policies associated with web content categories or reputation levels. l The web-cc-cache-miss-drop parameter is introduced. Issue this command to allow the controller to drop any packets that do not match any web content category or reputation levels in the controller's internal web content cache. The web-cc-category and web-cc-reputation parameters are introduced. Use these parameters to define a session ACL for traffic matching a web content category or reputation level. The service-tag parameter was introduced under reprovision parameter. The very-high-throughput-rates-enable parameter is introduced. This command enables very high throughput (VHT) rates on the 2.4 GHz band through the addition of VHT Modulation and Coding Scheme values 8 and 9, providing 256-QAM modulation and encoding that allows for 600 Mbit/sec performance over 802.11n networks. VHT rates are supported on W-AP220 Series access points on both 20 and 40 MHz channels. The output of this command can display: l an s flag to indicate that the AP is enabled with a striping IP address. l the service tag of an AP. If a GRE striping IP address is configured in the ap-lacp-striping-ip profile, the output of this command displays the GRE striping IP address. The format of the System Status Script output is changed to the following: function-name(line-num): new-total-drops/total-drops newpriority-drops/total-priority-drops Example: wlc_dotxstatus(40576): 5034/3231117 4272/1907873 This change helps to determine if priority (voice or video) frames are dropped from the AP Wi-Fi driver drop-list. NOTE: The System Status Script is displayed for W-AP200 Series and W-AP220 Series access points only. The output of this command can display the service tag of an AP. l The session web-cc parameter is introduced. This command displays web-content category information about the session. l The web-cc parameter is introduced. This command parameter displays web-content classification table information, including the Dell Networking W-Series ArubaOS 6.4.x | User Guide The ArubaOS Command-Line Interface | 13