Dell XPS M1210 MXC062 XPS M1210 Service Manual - Page 25

Keyboard: Dell XPS M1210 Service Manual, Back to Contents Before Working Inside Your, Computer

Get Dell XPS M1210 MXC062 PDF manuals and user guides View all Dell XPS M1210 MXC062 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Back to Contents Page Keyboard Dell™ XPS™ M1210 Service Manual CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer. 1. Follow the instructions in Before Working Inside Your Computer. 2. Remove the hinge cover (see Removing the Hinge Cover). 3. Remove the three M2.5 x 5-mm screws at the top of the keyboard. NOTICE: The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the keyboard. 4. Lift the keyboard only enough to hold it up and slightly forward to allow access to the keyboard connector on the system board. 5. Pull up on the keyboard-connector pull-tab to disconnect the keyboard cable from the system board. 6. Remove the keyboard. NOTICE: To avoid scratching the palm rest when replacing the keyboard, hook the tabs along the front edge of the keyboard into the palm rest, and then press on the right edge near the top to snap the keyboard into place before replacing the three screws at the top of the keyboard. 1 M2.5 x 5-mm screws (3) 2 keyboard 3 keyboard-connector pull-tab

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
Back to Contents Page
Keyboard
Dell™ XPS™ M1210 Service Manual
CAUTION:
Before you begin the following procedure, follow the safety instructions in the
Product
Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
Before Working Inside Your
Computer
) before working inside the computer.
1. Follow the instructions in
Before Working Inside Your Computer
.
2. Remove the hinge cover (see
Removing the Hinge Cover
).
3. Remove the three M2.5 x 5-mm screws at the top of the keyboard.
NOTICE:
The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when
removing and handling the keyboard.
4. Lift the keyboard only enough to hold it up and slightly forward to allow access to the keyboard connector on the
system board.
5. Pull up on the keyboard-connector pull-tab to disconnect the keyboard cable from the system board.
6. Remove the keyboard.
NOTICE:
To avoid scratching the palm rest when replacing the keyboard, hook the tabs along the front edge of the
keyboard into the palm rest, and then press on the right edge near the top to snap the keyboard into place before
replacing the three screws at the top of the keyboard.
1
M2.5 x 5-mm screws (3)
2
keyboard
3
keyboard-connector pull-tab