Dell XPS M1210 MXC062 XPS M1210 Service Manual - Page 32
b. Connect the antenna cables to the antenna connectors on the WLAN card by matching the color of the cable
View all Dell XPS M1210 MXC062 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
4. Install the replacement WLAN card: NOTICE: Do not install a Mobile Broadband card in the WLAN card slot. a. Insert the WLAN card connector into the system board connector at a 45-degree angle, and then press the other end of the WLAN card down into the securing tabs until the card clicks into place. NOTICE: To avoid damage to the WLAN card, never place cables under the card. NOTE: If you are installing a WLAN card for the first time, you will find a clear-plastic protective sleeve on each antenna cable connector. Before you connect the antenna cables to the WLAN card, slide the sleeves off of the cable connectors. b. Connect the antenna cables to the antenna connectors on the WLAN card by matching the color of the cable to the color of the triangle beside the connector. Connect the main antenna cable (white) to the antenna connector with the white triangle. Connect the auxiliary antenna cable (black) to the antenna connector with the black triangle. NOTE: Your WLAN card may have two or three antenna connectors, depending on the type of card you ordered. If your computer has a gray antenna cable, attach it to the connector with the gray triangle, if one is available on your card.