Dell XPS M1210 MXC062 XPS M1210 Service Manual - Page 40

Internal Card With Bluetooth® Wireless Technology: Dell XPS M1210 Service Manual

Page 40 highlights

Back to Contents Page Internal Card With Bluetooth® Wireless Technology Dell™ XPS™ M1210 Service Manual CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer. NOTE: If you ordered an internal card with Bluetooth wireless technology with your computer, the card is already installed. 1. Follow the instructions in Before Working Inside Your Computer. NOTE: The internal card with Bluetooth wireless technology is located in the battery bay. You must remove the main battery (as instructed in Before Working Inside Your Computer) before you can access the card. 2. Remove the M2 x 3-mm screw that secures the card in place. 3. Using your fingers or a plastic scribe, carefully pull the card out of the compartment and lift the mylar tape, if present, so that you can disconnect the card from its cable and remove it from the computer. 4. To replace the card: a. Connect the card to the cable and then carefully insert the card into the compartment. b. Replace the M2 x 3-mm screw. 1 M2 x 3-mm screw 2 internal card with Bluetooth wireless technology 4 battery bay 3 card connector Back to Contents Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57

Back to Contents Page
Internal Card With Bluetooth® Wireless Technology
Dell™ XPS™ M1210 Service Manual
CAUTION:
Before you begin the following procedure, follow the safety instructions in the
Product
Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
Before Working Inside Your
Computer
) before working inside the computer.
NOTE:
If you ordered an internal card with Bluetooth wireless technology with your computer, the card is already
installed.
1. Follow the instructions in
Before Working Inside Your Computer
.
NOTE:
The internal card with Bluetooth wireless technology is located in the battery bay. You must remove the main
battery (as instructed in
Before Working Inside Your Computer
) before you can access the card.
2. Remove the M2 x 3-mm screw that secures the card in place.
3. Using your fingers or a plastic scribe, carefully pull the card out of the compartment and lift the mylar tape, if present,
so that you can disconnect the card from its cable and remove it from the computer.
4. To replace the card:
a. Connect the card to the cable and then carefully insert the card into the compartment.
b. Replace the M2 x 3-mm screw.
1
M2 x 3-mm screw
2
internal card with Bluetooth wireless technology
3
card connector
4
battery bay
Back to Contents Page