Dell XPS M1210 MXC062 XPS M1210 Service Manual - Page 33

Mobile Broadband WWAN Card

Page 33 highlights

1 antenna cable connectors (2) 2 triangles (2) 5. Replace the communications card cover. 6. If the WLAN card you just replaced is being installed in this computer for the first time, see "Using Networks" and "Drivers" in the Owner's Manual for your computer for instructions on connecting to a wireless network and installing drivers. Mobile Broadband (WWAN) Card CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. CAUTION: Only products approved for use in your portable computer may be installed. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. NOTICE: To prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer. NOTE: Mobile Broadband cards are also known as WWAN cards. 1. Follow the procedures in Before Working Inside Your Computer. 2. Turn the computer upside down and loosen the captive screw to remove the communications card cover.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57

1
antenna cable connectors (2)
2
triangles (2)
5. Replace the communications card cover.
6. If the WLAN card you just replaced is being installed in this computer for the first time, see "Using Networks" and
"Drivers" in the Owner's Manual for your computer for instructions on connecting to a wireless network and installing
drivers.
Mobile Broadband (WWAN) Card
CAUTION:
Before you begin the following procedure, follow the safety instructions in the
Product
Information Guide
.
CAUTION:
Only products approved for use in your portable computer may be installed.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as the back panel) on the computer.
NOTICE:
To prevent damage to the system board, remove the main battery (see
Before Working Inside Your
Computer
) before working inside the computer.
NOTE:
Mobile Broadband cards are also known as WWAN cards.
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Turn the computer upside down and loosen the captive screw to remove the communications card cover.