Dell XPS M1210 MXC062 XPS M1210 Service Manual - Page 45

Display : Dell XPS M1210 Service Manual, Display Assembly

Get Dell XPS M1210 MXC062 PDF manuals and user guides View all Dell XPS M1210 MXC062 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Back to Contents Page Display Dell™ XPS™ M1210 Service Manual Display Assembly Display Bezel Display Panel Display-Panel Brackets Display Assembly Removing the Display Assembly CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer. 1. Follow the instructions in Before Working Inside Your Computer. 2. Turn the computer upside down and loosen the captive screw on the communications card cover. NOTE: You must detach the Mini-Card (WLAN and/or Mobile Broadband) antenna cables (see step 3) before you can remove the display assembly. If a Mini-Card is installed, disconnect the antenna cables from the card(s). If one is not installed, detach the antenna cables from their secured location. 3. Disconnect the antenna cables from the Mini-Card(s), if applicable. 4. Turn the computer top-side up.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
Back to Contents Page
Display
Dell™ XPS™ M1210 Service Manual
Display Assembly
Display Bezel
Display Panel
Display-Panel Brackets
Display Assembly
Removing the Display Assembly
CAUTION:
Before you begin the following procedure, follow the safety instructions in the
Product
Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
Before Working Inside Your
Computer
) before working inside the computer.
1. Follow the instructions in
Before Working Inside Your Computer
.
2. Turn the computer upside down and loosen the captive screw on the communications card cover.
NOTE:
You must detach the Mini-Card (WLAN and/or Mobile Broadband) antenna cables (see
step 3
) before you can
remove the display assembly. If a Mini-Card is installed, disconnect the antenna cables from the card(s). If one is not
installed, detach the antenna cables from their secured location.
3. Disconnect the antenna cables from the Mini-Card(s), if applicable.
4. Turn the computer top-side up.