Dell XPS M1210 MXC062 XPS M1210 Service Manual - Page 30

Mini-Cards: Dell XPS M1210 Service Manual, WLAN Card

Get Dell XPS M1210 MXC062 PDF manuals and user guides View all Dell XPS M1210 MXC062 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Back to Contents Page Mini-Cards Dell™ XPS™ M1210 Service Manual WLAN Card Mobile Broadband (WWAN) Card Subscriber Identity Module (SIM) Card WLAN Card CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. CAUTION: Only products approved for use in your portable computer may be installed. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. NOTICE: To prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer. 1. Follow the procedures in Before Working Inside Your Computer. 2. Turn the computer upside down and loosen the captive screw to remove the communications card cover. 3. If a WLAN card is not already installed, go to step 4. If you are replacing a WLAN card, remove the existing card: a. Disconnect the two antenna cables from the WLAN card.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
Back to Contents Page
Mini-Cards
Dell™ XPS™ M1210 Service Manual
WLAN Card
Mobile Broadband (WWAN) Card
Subscriber Identity Module (SIM) Card
WLAN Card
CAUTION:
Before you begin the following procedure, follow the safety instructions in the
Product
Information Guide
.
CAUTION:
Only products approved for use in your portable computer may be installed.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as the back panel) on the computer.
NOTICE:
To prevent damage to the system board, remove the main battery (see
Before Working Inside Your
Computer
) before working inside the computer.
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Turn the computer upside down and loosen the captive screw to remove the communications card cover.
3. If a WLAN card is not already installed, go to
step 4
. If you are replacing a WLAN card, remove the existing card:
a. Disconnect the two antenna cables from the WLAN card.