Dell XPS M1210 MXC062 XPS M1210 Service Manual - Page 46
Removing the Hinge Cover, Keyboard, cable channel.
View all Dell XPS M1210 MXC062 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
5. Remove the hinge cover (see Removing the Hinge Cover). 6. Remove the keyboard (see Keyboard). 1 display assembly 2 pull-tab on display cable 3 Mini-Card antenna cables 7. Use the pull-tab to disconnect the display cable from the system board, and then disengage the display cable from its cable channel. 8. Disengage the antenna cables from their cable channel. 9. Remove the four M2.5 x 8-mm screws (two labeled "D" on the bottom of the computer, and two labeled "D" on the back of the computer) that connect the display to the computer base.
5. Remove the hinge cover (see
Removing the Hinge Cover
).
6. Remove the keyboard (see
Keyboard
).
1
display assembly
2
pull-tab on display cable
3
Mini-Card antenna cables
7. Use the pull-tab to disconnect the display cable from the system board, and then disengage the display cable from its
cable channel.
8. Disengage the antenna cables from their cable channel.
9. Remove the four M2.5 x 8-mm screws (two labeled "D" on the bottom of the computer, and two labeled "D" on the
back of the computer) that connect the display to the computer base.